TRITON TR86 SUSPENDED SOLIDS SENSOR - ECD

TRITON TR86 SUSPENDED SOLIDS SENSOR – ECD

Product Type: SUSPENDED SOLIDS SENSOR

Model: TRITON TR86

Manufacturer: ECD (USA)

Application:

   The Triton TR86 sensor is designed for the continuous measurement of suspended solids in various ranges from 0 – 1000 mg/l to 0 – 5000 mg/l. The sensor emits a beam of 850 nm near infrared light into the sample where it is scattered by particles suspended in the water. The amount of back scattered light returning to the sensor is measured and correlated to the amount of suspended solids in the sample.

Price: Contact us
Telephone: +84 28 66570940 / +84 909 705 786
Email: info@habcom.vn

Product Type: SUSPENDED SOLIDS SENSOR

Model: TRITON TR86

Manufacturer: ECD (USA)

Application:

   The Triton TR86 sensor is designed for the continuous measurement of suspended solids in various ranges from 0 – 1000 mg/l to 0 – 5000 mg/l. The sensor emits a beam of 850 nm near infrared light into the sample where it is scattered by particles suspended in the water. The amount of back scattered light returning to the sensor is measured and correlated to the amount of suspended solids in the sample.

Specifications:

  • Measuring principle: Particle caused back scattering of 850 nm near infrared light with sunlight rejection filter
  • Measuring Range: -1 sensor, 0.00-1000 mg/l or 0 … 1000 NTU, FNU

  -2 sensor, 0.00-2000 mg/l or 0 … 2000 NTU, FNU

  -3 sensor, 0.00-5000 mg/l or 0 … 4000 NTU, FNU, ppm, mg/L and % solids

  • Accuracy: 2% of reading or 0.5 NTU, whichever is larger
  • Process Temperature Range:: –5 … 50°C
  • Temperature Compensation: Internal Temperature compensation
  • Process pressure range: 50 psi max. in Flow Cell. Vacuum operation is not permitted.
  • Drift: < 1% / month
  • Wetted Materials Sensor body: stainless steel AISI 316 Ti, Sensing end: epoxy
  • Process Connection: 1” NPT Nylon compression fiting
  • Electrical connection: Water Resistant 5-wire measuring cable(Standard)
  • Cable Length: 10 ft (3.0 m), 20 ft (6.1 m), 30 ft (9.1 m) cables

Warranty policy from HABCOM Technology Corporation

HABCOM warrants all products following manufacturer’s standards.

All warranted products must be used under manufacturer’s conditions.

Supporting time: Within working hours (8h-12h & 13h-17h) on working days of the week.

For important devices – Our company will have spare parts to replace as the commitments.