pH TRANSMITTER T80 – ECD

Product Type: pH TRANSMITTER T80

Model: T80-10-210-01

Manufacturer: ECD (USA)

Application:

   Used for monitoring pH parameters from pH Sensor.

Main Display screens; the Data Screen, the Millivolt Screen and the Graphical Display screen.

The Data Screen displays the measurement type, the measured value with units, the % milliamp output of the 4-20 mA channel and the temperature. The mV Screen displays the measurement type, the raw millivolt signal from the sensor, the % milliamp output of the 4-20 mA channel and the temperature. The Graphical Screens display the measurement type, the measured value with units and a graphical representation of the % milliamp output. Three graphical styles are available; a Trend line, a Bar graph or a Gauge. The status of alarm relays, energized/de-energized is displayed on transmitters with relays.

Specifications:

• Have 2 types: single or dual channel.
• Input connection: 1 or 2 pH Sensor (or another type sensor).
• Input range: -1.00 – 15.00 pH.
• Temperature: -30 – 140°C.
• Accuracy: 0.02 pH.
• Enclosure: Polycarbonate, NEMA 4X, weatherproof, ½ DIN, (L xWx D) 5.7” X 5.7” X 3.5” (14.4cm X 14.4cm X 9.0cm).
• Display: 128 x 64 pixels (2.75” x 1.5”) LCD, Black/Grey background on loop powered instruments, Blue/White background LED backlight on 100-240 VAC and 24 VDC.
• Input power:

Code -0:   Loop powered, 24 VDC, 600 Ω maximum load (18-36VDC @ 35 mW minimum)

Code -1:  24 VDC (18-36 VDC @ 250 mW minimum)

Code -2:   100-240 VAC, 50/60 Hz, 4W.

• Outputs: 4-20 mA output (standard), Fault Condi0on: 3.5 mA, 22 mA or none, Modbus RTU (standard); HART® (optional); Alarm Relays (Op0onal) Three (3) SPDT, form 1C, 250 VAC, 3 Amp resistive maximum relays, user configurable as Hi/Lo or Fault alarms.

Warranty policy from HABCOM Technology Corporation